Ride Luft

THE PHYSICS

How your watts become speed — nothing is faked.

POWER → SPEED

Every speed in Luft Train comes from the same equation real cycling scientists use. Your power has to overcome two things: aerodynamic drag (which grows with the cube of your speed — this is why going 10% faster takes much more than 10% more power) and rolling resistance from the tyres.

P = ½ · ρ · CdA · v³ + Crr · m · g · v

  • ρ = 1.2 kg/m³ — air density at sea level on a mild day.
  • CdA = 0.24 m² — your drag coefficient × frontal area, in a track-racing tuck. On the road we use a higher, more upright value.
  • Crr = 0.0025 — rolling resistance of a fast track tyre on smooth boards.
  • m — your body weight plus 8 kg of bike.
  • g = 9.807 m/s² — gravity.

Before any of that, 2% of your power is lost in the chain and bearings (a 98% efficient drivetrain — realistic for a clean, well-oiled chain). The equation can't be rearranged neatly, so the app solves it numerically: it narrows in on the exact speed where the power needed equals the power you're producing, forty times per reading, every frame.

GEARING & CADENCE

On the track your gear is fixed, so your cadence is decided by your speed and your gear choice:

cadence (rpm) = speed ÷ rollout × 60

rollout = wheel circumference (2.105 m) × chainring ÷ sprocket

Gearing never creates watts — but humans aren't equally strong at every cadence. The app models an efficient pedalling band of roughly 55–120 rpm. Below it you're grinding and lose efficiency; above it you're spinning out and lose efficiency. Pick a bigger gear and the same speed needs fewer rpm — that's the whole tactical game of track gearing.

Crank length shifts the band rather than raising it: longer cranks give more leverage at low rpm but a bigger circle to spin, so the efficient range slides down by about 1.2 rpm per millimetre. The effect is deliberately small — exactly as it is in real life.

DRAFTING

Sit 0.4–4 m behind another rider, within about a metre laterally, and you're in their slipstream. The app credits you the equivalent of roughly 7–9% more power — the well-established wind-tunnel figure for a close wheel-follower. Get boxed in with a rider ahead and one alongside and you're blocked, losing about 6% until you find a way out. Position on the track is a real decision, not decoration.

THE ANAEROBIC TANK (W′)

Every rival in a race has two numbers: a steady pace they can hold all day (a share of your FTP, so races stay close whoever you are) and an anaerobic tank — the sports-science W′, measured in joules. Sprinters carry about 16 kJ, diesels about 25 kJ.

Riding above their steady pace drains the tank joule-for-joule; riding below it refills it — faster when they're sitting in a draft. Empty the tank and they pop: their sprint is gone until they've recovered back to half full. That's why a well-timed attack works, and why the rider who goes too early always comes back to you.

ON THE ROAD

Route rides use the same power-balance approach with road-appropriate drag and rolling values, and climbs add the gravity term — on a gradient, most of your watts go into lifting you and the bike uphill, which is why watts-per-kilo decides climbing speed. When a trainer doesn't report speed at all, exported files estimate it from your power and weight so your training log stays sensible.

HEART RATE & ZONES

Power zones are anchored to your FTP and heart-rate zones to your max HR, using the standard five-zone model. Workout blocks, the effort-profile chart and your ride timeline are all coloured by these zones, so the colour you see during an effort is the zone your body is actually in.

THE MAP ON YOUR EXPORT

Your .FIT download stamps a real GPS trace matched to how far you actually rode: velodrome events loop a track oval scaled to the exact lap length of the boards you raced (250 m, 450 m or 500 m), and route rides follow the coastline or climbs you saw on screen. Upload it and it appears as a Virtual Ride with a map — laps and all.